Filter
Top Products
iDP-3210 User’s Manual
58/67 CITIZEN
(27) Specifying/Canceling 90°-right- turned Characters (ESC V n)
Code : [1B]h + [56]h + n
* {0 is less than or equal to n is less than or equal to 1} Data is described in Hex code.
Specifying/canceling characters 90°-right- turned character.
• No underlines are attached to 90°-right- turned characters .
• "n" means the followings.
n (Hex) Condition
0
Canceling
90°-right- turned Characters
1
Specifying
90°-right- turned Characters
• The initial value of n is "0".
(28) Specifying Absolute Positions (ESC $ n1 n2)
Code : [1B]h + [24]h + n1 + n2
* {0 is less than or equal to n1 is less than or equal to FF}
{0 is less than or equal to n2 is less than or equal to 1} Data is described in Hex code.
The printing start position is specified in the number of dots from the beginning of line.
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
Therefore, the printing start position is equal to n1 + n2 x 256 from the beginning of line..
• Specifying beyond the line end is ignored.
(29) Specifying Relative Positions (ESC \ n1 n2)
Code : [1B]h + [5C]h + n1 + n2
* {0 is less than or equal to n1 is less than or equal to FF}
{0 is less than or equal to n2 is less than or equal to FF} Data is described in Hex code.
The printing start position is specified in the number of dots from the current
position.
• Rightward direction is taken as plus and leftward direction as minus.
• To specify N dot in minus (left) direction, use a complement of N for assignment.
- N dots = 65536 - N
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
• Specifying exceeding the end of line is ignored.
idp-3210 User's Manual