Citizen Systems CBM-910 Printer User Manual


 
CBM-910 Users Manual
CITIZEN 11/47
3.2 Part Descriptions
1 DC Jack Insert the output plug of the AC adapter attached
2 Power Switch When switched ON, power is supplied to the Printer, starting the initializing operation.
3 Power Lamp Lighted when power is turned ON and goes out when turned OFF.
4 SEL Lamp Printer lights up in Select (ON LINE) state, and is put off in Deselect (OFF LINE) state.
Printing operation is available only while this lamp is lit.
1) It blinks, for paper end, at 0.5 second intervals. Change paper.
2) On occurrence of any alarm state (blinking) due to any reason other than paper end, it starts to
blink at 1/4 second intervals.
5 LF Switch Paper is fed when switch is pressed (de-select condition only). Used to supply paper or to
insert some space in the output.
6 SEL Switch Printer is selected (ON-LINE) by pressing this switch.
Printer is de-selected (OFF-LINE) by pressing the switch again.
Also used to release alarm state. In Deselect state, if data still remain in the input buffer,
they are all printed out.
7 Interface Connector Printer is connected to various hosts via cables. Please ensure that both the printer and
the host are turned off before connecting.
8 Printer Cover Opened to change ribbon cassette and paper roll.