Filter
Top Products
CITIZEN 16
2.5.2 Explanation of each parts
l Front cover
Open/close this cover in case of paper change or paper jam.
l Paper lamp
Lights up when paper runs out.
l Feed switch
Press this switch to feed the paper. Pressing this switch keeps paper feeding continuously.
l Mechanism lock lever
This lock lever is used to pull down the printer mechanism to lift up the print head and to
remove the paper manually. Or move the cutter blade in case the cutter blade is locked
due to paper jam.
l Head - up lever
This is the lever to lift up print head.
l Cutter blade(For CBM-290)
Used to cut the paper manually.
l Mounting bracket
Used to mount this equipment on the rack etc.
l Interface connector
Connect a cable for power supply and interface to this connector.
l DIP switch
Used to set the initial setting such as the type of interface (serial/parallel) or print density etc.
l FG terminal
Used to earth the frame of main body. Connect it properly.
l Auto paper cutter (CBM-291 only)
Paper is cut automatically by command. Complete full cut or partial cut (one tear point remains) can be
specified.