Filter
Top Products
2-4
2.4 Printer Setup Mode
To enter the printer setup mode, press and hold down the Pause then press the
Feed key and release both keys. The functions of the control keys are described
below.
Changes to the printer configuration are stored in nonvolatile memory. This
guarantees that the printer configuration is maintained even after the power is
turned off.
[Functions]
Print mode selection, peeling sensor ON/OFF, auto-cutter ON/OFF, etc.
Pause key: Selects the mode.
Feed key: Selects the mode item.
Stop key: Saves the selection contents and returns the printer to the
normal operating mode.
Mode item Indication
2.5 Self-Test Mode
The printer enters the self-test mode when the Feed key is pressed and held down
while turning the printer on.
[Functions]
The printer performs the test print or enters the data dump mode (prints out the
communication data by ASCII code). The printer returns to the normal operating
mode when the power is turned off.