Filter
Top Products
3-15
3.8.2 How to operate adjustable sensor
(1) Move the adjustable sensor unit to your required position to detect by turning
the adjust-knob. First measure the position to detect, then align the mark of
the measure on the guide rail upper with the sensor position mark (yellow) on
the upper sensor to set to the position to detect.
The sensor movable range is shown below.
(2) Load the liner and close the guide rail upper and set voltage to3V.
Note: For voltage setting, see the User’s Manual of the printer.
Sensor movable range
Left-side edge of paper
0mm
118mm(max.widthofpaper)
59 mm (sensor movable range