Filter
Top Products
25
Printer Operation
7. Align the media with the left fixed media guide (2 locations),
align the right movable media guide with the media width, and
lower the sensor arm.
8. Push the head close knob to lower and lock the head unit. Be
sure to always push the head close knob to lock the head unit.
Align it with the width of the media that has been set, then set
the media width and media thickness adjustment dials.
See “Chapter 3 Printer Adjustments”.
Head close knob
Media width adjustment
Media thickness adjustment
Head unit
Fixed media guide
Sensor arm
Movable media
guide
9. With the power switched on, push the FEED key to feed the
media.
It will halt at the next print start position.
Media Thickness Adjustment
(p.42)
Media Width Adjustment
(p.43)
Setting the Media