Filter
Top Products
E
N
G
L
I
S
H
INSIDE VIEW:
CLP 1001
CLP 2001
n
(1) Cover: Opens to allow loading of the
media and ribbon.
(2) Control panel: To set the printer
configuration settings.
(3) Ribbon holder: To attach the source or
unused ribbon (not on CLP 1001)
(4) Ribbon winder: To wind the ribbon after
printing (not on CLP 1001)
(5) Roll holder: Holds the roll of media.
(6) Roll guide: Guides the roll of media. This
is adjusted according to the width of the
media.
(7) Media holder: Holds the roll holder and
media. External bracket on 1001 and
2001.
(8) Open lever: To swing the printhead out of
the way when loading the media or
cleaning the printhead.
(9) Media Width adjustment knob
Allows you to adjust for different media
widths using the window. See 14
(10) Media arm
Holds down the media. The adjustable,
movable media sensor inside (CLP 6001,
6401, 7201e) detects the media position.
(11) Media arm open lever
Releases the media arm (not on 1001)
(12) High resolution front sensors
Fixed media sensor (6401,7201e, 7202e)
(13) Offset check window
Allows you to see the printhead pressure
adjustment (see 9 above)
(14) Media width adjustment window
Allows you to see the media with
adjustment (see 9 above)
1
5
6
7
3
13
8
4
2
9
14