Citizen Systems iDP3421 Printer User Manual


 
iDP3420/3421/3423 User’s Manual
108 CITIZEN
ESC DC3 n
[Function] Printing the message
[Code] <1B>H <13>H n
[Range] 1 n 10
[Function] This command prints a message. If the value of n is specified beyond the range, the
message will not be printed.
ESC "y" n
[Function] Setting the print lines after paper near end detection
[Code] <1B>H<79>H n
[Range] 0 n 255
[Outline] This command sets the number of print lines after paper near end detection. It stops
printing after printing n × 2 lines since detection of the paper near end, resulting in the paper
near end state (See 4.12 Operation Panel and Error Indications). The PE signal (Parallel
interface only) changes when the paper near end is detected.
[Default] n = 0