Filter
Top Products
— 23 —
ESC @
[Function] Initializing the Printer
[Code] <1B>H<40>H
[Outline] Clears data stored in the print buffer and brings various settings to the initial state
(Default state). Items not cleared are as shown below.
•Data inside the internal input buffer are not cleared.
• Does not clear any data in the internal input buffer.
• Does not clear downloaded characters.
• Does not clear defined downloaded characters.
• Does not clear defined downloaded bit image.
•Does not clear defined macro.
• Does not clear setting for print density.
• Does not clear baud rate setting of serial port.
• Does not clear valid/invalid setting for panel switch.
• Does not clear ASB mode setting.
• Does not clear setting for auto power-off time.
• Does not clear memory switch.
[Caution] At power off, the following settings are cleared in addition to the items cleared by
this command.
• Clears input buffer.
• Clears macro.
• Return ASB mode according to the memory switch setting.
• Clears valid/invalid setting for panel switch.
[Sample Program]
PRINT #1, CHR$ (&H1B) + “ ! “ + CHR$ (&H30) ;
PRINT #1, CHR$ (&H1B) + “V” + CHR$ (1);
PRINT #1, “AAA” + CHR$ (&HA);
PRINT #1, CHR$ (&H1B) + “@”;
PRINT #1, “AAA” + CHR$ (&HA);
[Print Results]
A A A
A
A
A