Filter
Top Products
— 23 —
4.3
Connecting Paper Holding Unit (PHU) (When PHU is used)
1. Turn the printer power off.
2. Remove the three screws on the control box and open the cover.
3. Connect the PHU to the PHU connector on the printed board in the control
box in the correct direction.
PNE connector
Cover
Head up
lever
4.4 Setting/Replacing Paper Roll
4.4.1 Paper Setting from Paper Side-in
1. Open the paper guide with the head up lever.
2. Cut the top end of the paper roll at about right angle to the roll direction.
(Fig. 4-1)
3. Insert a paper roll.
4. Confirm that the roll paper end is rest in the guide. Close the paper guide.
5. Roll paper is automatically loaded and paper initializing operation starts.
6. When paper initialize operation is finished, the printer is ready for printing.