Filter
Top Products
— 26 —
4.7 Removing Cutter Lock
When cutter lock is used, opening the guide with the head up lever may fail.
Forced opening may cause a break. Remove cutter lock in the following
procedure.
1. Turn on the printer. The auto-cutter starts initialize operation to restore the
cutter.
2. If the above operation is not successful for restoring the cutter, turn off the
printer and turn the cutter release knob of the auto-cutter in the arrow
direction using a pointed tool (such as pincette or ball-point pen). The blade
of the auto-cutter will be restored.
3. Remove the paper remainder on the blade of the cutter by using tweezers or
the like.
4. When the control box is set apart from the printer, turn the cross hole shown
in the figure in the arrow direction to restore the blade.
Cutter release knob