Filter
Top Products
— 36 —
MSW2
Switch No. Function 0 (OFF) 1 (ON)
Factory
Setting
2-1 Reserved — Fixed ON
2-2 Auto-cutter Disabled Enabled ON
2-3 Buffering printing Disabled Enabled ON
2-4 Full digit printing PPU EPSON ON
2-5
Treatment after PE recovery
Print next line Print top OFF
when cover is closed
2-6 Reserved Fixed — OFF
2-7 Reserved Fixed — OFF
2-8 NPE enabled/disabled Enabled Disabled OFF
MSW3
Switch No. Function 0 (OFF) 1 (ON)
Factory
Setting
3-1 Recovery from cutter Enabled Disabled OFF
error with FEED switch
3-2
Cover open error at
Cover closed Command OFF
selection of recoverable error
3-3 Selects parallel #31 pin Reset Ignored OFF
RESET signal
3-4 Selects paper Thermal paper Black marked paper OFF
3-5 Reserved Fixed — OFF
3-6 Reserved Fixed — OFF
3-7 Selects mode PPU mode L90 mode OFF
3-8 Printer cover open
Automatic recovery error
Recoverable error OFF
during printing
MSW4
Switch No. Function 0 (OFF) 1 (ON)
Factory
Setting
4-1 Reserved Fixed — OFF
4-2 Reserved Fixed — OFF
4-3 Setting first print Set Not set OFF
position at power on
4-4 Collecting operation Disabled Enabled OFF
4-5 Direction of collection Backward Forward OFF
4-6 Paper ejection Normal ejection Direct ejection OFF
4-7 Presenter operation Operation disabled Operation enabled OFF
with paper
4-8 Reserved Fixed — OFF