Filter
Top Products
7
English
Wireless headphones (Optional)
Power OFF/ON turns the headphones power on and off.
Single channel wireless headphones are appropriate if only one monitor is installed in
the passenger compartment.
Configuration 1
IR CH A IR CH B
Video Source
Monitor Monitor
Configuration 2
IR CH A IR CH B
Monitor Monitor
Video Source
Video Source
If two monitors are used for rear entertainment systems, dual channel wireless
headphones are most appropriate. In this circumstance, channels A and B on both
headphone and monitor should be set respectively.
Volume adjustments are done at the wireless headphones.
Note :
If two monitors are used for the rear entertainment systems, and single channel
wireless headphones are used; either one of the monitor’s IR channel must be
turned “off ”.
Playing a video or game station
The monitor is preset at the factory to turn on automatically when the vehicle’s ignition
is turned on. The monitor remains dark until it detects a video signal.
1. Insert the media (tape, cartridge, game or disc) into the video source.
2. Turn on the headphones.
If this is the first time you’ve used the unit, make sure your wireless headphones
have fresh batteries installed.
Note :
Your wireless headphones must be in view of the monitor for the infrared
transmission to work.
3. Press play on the video source.
4. Adjust the volume on your wireless headphone.