Filter
Top Products
Operation
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
9
Operation
8
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
To position the image on the monitor
1. Press to display the main menu.
2. Use + or – to select the Position control icon .
3. Press to enter the Position control mode.
4. Press to toggle the Position mode between vertical or horizontal.
5. Press + or – to move the image up/down or left/right.
6. Press to exit.
To control brightness
1. Press to display the main menu.
2. Use + and – to locate the Brightness control icon .
3. Press to enter the Brightness mode.
4. Press + or – to select the desired brightness level.
5. Press to exit.
To adjust the color bar
1. Press to display the main menu.
2. Press + or – to locate the Color Bar icon .
3. Press to reset the unit to its default color settings.
4. Press + or – to select the desired level.
5. Press to exit.
To reset the unit to default settings
1. Press to display the main menu.
2. Press + and – to locate the Reset icon .
3. Press to reset the unit to its default settings.
4. Press to exit.
1
3
2
4
Figure 5. Zoom quadrants
Quadrant 1.Top left of VGA image.
Quadrant 2.Top right of VGA image.
Quadrant 3. Bottom right of VGA
image.
Quadrant 4. Bottom left of VGA image.
To exit Zoom control, press .
To use pan control
1. Press to display the main menu.
2. Use the + or – buttons to select the Pan control icon .
3. Press to enter Pan control mode.
4. Press to toggle the Pan mode between vertical and horizontal.
5. Press + or – to pan the display up, down, right, or left.
6. Press to exit.
To select Overscan/Underscan mode
By default, the television picture is in Overscan mode, meaning the border of the pic-
ture is outside the visible area of the television screen.The Scan Converter also fea-
tures Underscan mode, which linearly scales the input picture into the visible part of
the television screen.
In Zoom mode, the Overscan/Underscan mode is not supported. Whenever Zoom
mode is enabled, the Overscan/Underscan function will be temporarily disabled.
1. Press to display the main menu.
2. Use the + and – buttons to select the Overscan/Underscan icon .
3. Press to enter the Overscan/Underscan control mode.
4. Press + or – to toggle between Overscan/Underscan mode.
5. Press to exit.
P