Filter
Top Products
Operating Instructions
3. CONVOTHERM PC-Control
page 3
10 July 2006 CONVOTHERM PC-Control
6. Enter the next step:
• Press the New step button.
• Fill out the blank cardfile card.
7. Repeat Steps 2-6 as needed for up to 9 Steps per Program.
8. In the Programming window.
1) Enter Programname (up to 49 characters) in the entry field.
2) Enter Category (up to 49 characters) to assign the Program to a product group.
3) Use the down key to view a list containing existing Categories.
4) Click on a Category to select it, or type a new category.
9. Press OK to save the Program, or press Cancel to quit the Program without saving.
Changes to the Program are lost.
Notes:
• A new step can only be entered when the current step is completed.
• After complete input of a step, the other steps can be viewed, by clicking on the cardfile
card tab with the step number.
• A maximum of 9 steps can be entered.
• The total time of a Program is displayed under the Program number.
3.2.2 Modify an Existing Program
To modify an existing Program, open the Programming window by:
• Double clicking on an existing Program Number in the Program List.
• OR
1) Selecting a free Program number.
2) Left clicking the Edit dropdown menu.
3) Left clicking Change on the Edit menu.
• OR by right clicking the Program number.
Æ A dropdown menu with the command Modify opens.
Add a New Step
Click New Step.
An empty cardfile card is added at the end of the Program.
Insert a Step
1. Click on the cardfile card tab before
the new step.
2. Click Insert step.
3. An empty cardfile card is inserted and all the steps after the new one are moved back
one place.