Filter
Top Products
Operating Instructions
2. CONVOTHERM PC-HACCP
page 2
10 July 2006 CONVOTHERM PC-HACCP
2.1.2 Setting Up the CONVOTHERM PC-HACCP Software
Network Settings
1. Start the CONVOTHERM PC-HACCP software.
2. In the Setup menu, go to Options.
3. In Network 1, choose a COM port.
• Most computers use COM1 for RS232.
• The USB network COM selection will depend on the software included with the
USB/Network adapter.
4. In Network 2, choose a second COM port even if the second network will not be used.
5. Click the connection type:
• RS232/V24 for a stand-alone system.
• RS485-Network for a network system.
6. Click OK to save or Cancel to quit without saving.
7. Close the program and restart it.