Filter
Top Products
Getting Started 5–13
Help & Support
When the system advised
you of changes to the
configuration, you did not
accept them.
Reboot the computer and
follow the instructions for
accepting the changes.
A plug and play board may
not automatically configure
when added if the default
configuration conflicts with
other devices.
Deselect the automatic
settings in the Operating
System for the board and
choose a basic configuration
that doesn’t cause a
resource conflict. You can
also use Computer Setup to
reconfigure or disable
devices to resolve the
resource conflict.
Hardware Installation Problems (Continued)
Symptom Problem Solution
Internet Access
Symptom Problem Solution
Cannot connect to the
Internet.
Internet Service Provider
(ISP) account is not set up
properly.
Verify Internet settings or
contact your ISP for
assistance.
Modem is not set up
properly.
Reconnect the modem,
verifying the following
connections: telephone line
to telephone (for external
phone sets) and telephone
line to wall jack (from
computer to wall).
Web browser is not set up
properly.
Verify that the Web browser
is installed and set up to
work with your ISP.