Compaq 410C 486 DX2/50 MHZ 350 MB 4 MB 9.5 Personal Computer User Manual


 
5. To replace the PC Card ejection levers and pin, reverse the previous
steps.
Chapter 3.18 PC Card (PCMCIA) Doors and Springs
This section contains removal and replacement procedures for the PC Card
doors and springs. The top PC Card door and spring are located on the
keyboard assembly and the bottom PC Card door and spring are located on
the CPU base.
Top PC Card Door and Spring
To remove the top PC Card door and spring, follow these steps:
1. Disconnect all power from the computer and remove the AC Adapter and
battery pack (Section 3.2).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
The computer becomes top heavy when the keyboard assembly is removed and
the display is opened. To prevent damage to the display and the computer,
ensure that the display assembly is opened at a 90-degree angle.