Computer Setup
Maintenance and Service Guide 5–9
Security Menu
✎
Some of the menu items listed in this section may not be supported by your computer.
Diagnostics Menu
Select To do this
Setup Password Enter, change, or delete a setup password.
Power-On Password Enter, change, or delete a power-on password.
Password Options ■ Enable/disable stringent security.
■ Enable/disable the password requirement on computer restart.
DriveLock Passwords ■ Enable/disable DriveLock on any computer hard drive.
■ Change a DriveLock user password or master password.
✎
DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting)
the computer.
System IDs Enter a user-defined computer asset tracking number and ownership
tag.
Disk Sanitizer Run Disk Sanitizer to destroy all existing data on the primary hard
drive. The following options are available:
■ Fast: Runs the Disk Sanitizer erase cycle once.
■ Optimum: Runs the Disk Sanitizer erase cycle 3 times.
■ Custom: Allows you to select the desired number of Disk Sanitizer
erase cycles from a list.
■ Last status: Provides information about the last time Disk Sanitizer
ran on the computer.
Ä
If you run Disk Sanitizer, the data on the primary hard drive is
destroyed permanently.
Select To do this
HDD Self-Test Options Run a comprehensive self-test on any hard drive in the system.
Memory Check Run a comprehensive test on system memory.
Startup check Verify the system components needed for starting the computer.