Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–29
15. If it is necessary to replace the webcam module, release the webcam module 1 as far from the display
enclosure as the webcam module cable allows.
16. Disconnect the webcam module cable 2 from the webcam module.
17. Remove the webcam module. The webcam module is available using spare part number 538443-001.
18. If it is necessary to replace the display hinges, remove two Phillips PM2.5×5.0 screws 1 that secure the
display panel to the display enclosure.
19. Remove the display panel 2 from the display enclosure.