5–10 Maintenance and Service Guide
Computer Setup
System Configuration Menu
✎
Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language (or press f2) Change the Computer Setup language.
Boot Options ■ Set an f9, f10, and f12 delay when starting up.
■ Enable/disable CD-ROM boot.
■ Enable/disable floppy boot.
■ Enable/disable internal network adapter boot and set the boot
mode (PXE).
■ Enable/disable MultiBoot, which sets a boot order that can include
most boot devices in the system.
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.
Device Configurations ■ Swap the functions of the fn key and left ctrl key.
■ Enable/disable USB legacy support. When enabled, USB legacy
support allows the following:
❐ Use of a USB keyboard in Computer Setup even when
a Windows operating system is not running.
❐ Startup from bootable USB devices, including a hard drive,
diskette drive, or optical drive connected by a USB port to the
computer.
■ Enable/disable BIOS DMA data transfers.
■ Enable/disable fan always on while connected to an AC outlet.
■ Enable/disable Data Execution Prevention. When enabled, the
processor can disable some virus code execution, which helps to
improve computer security.
■ Enable/disable SATA Native Mode.
■ Enable/disable Dual Core CPU.
■ Choose Bit-shift or LBA-assisted HDD Translation Mode.
■ Enable/disable Virtualization Technology.
Built-In Device Options ■ Enable/disable embedded WLAN Device Radio.
■ Enable/disable Wake on LAN.
■ Enable/disable the optical disc drive.
Port Options ■ Enable/disable the USB port.
■ Enable/disable the ExpressCard slot.