Filter
Top Products
4. Lift the display assembly (2) straight up and remove it.
5.
If it is necessary to replace the display bezel or the display assembly internal components, remove
the following:
(1) Four rubber screw covers on the display bezel top edge. The rubber screw covers are included
in the Rubber Kit, spare part number 462397-001.
(2) Two rubber screw covers on the display bezel bottom corners.
(3) Two rubber screw covers on the display bezel bottom edge.
(4) Eight Phillips PM2.5×7.0 screws that secure the display bezel to the display assembly.
NOTE: See Camera module on page 35 for camera module removal information.
6. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
Component replacement procedures 51