Filter
Top Products
Power connector cable
Description Spare part number
Power connector cable 462403-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 34).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 37)
b.
Optical drive (see
Optical drive on page 44)
c.
Switch cover and keyboard (see
Switch cover and keyboard on page 46)
d.
Display assembly (see
Display assembly on page 50)
e.
Top cover (see
Top cover on page 55)
f.
Fan (see
Fan on page 58)
g.
System board (see
System board on page 60)
Remove the power connector cable:
1. Remove the power connector (1) from the clip built into the base enclosure.
2. Remove the power connector cable (2) from the clips and routing channel built into the base
enclosure.
Component replacement procedures 63