Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-10 Configuring and Monitoring the Switch
Writer: Fran Spragens Project: Configuring and Monitoring the Switch Comments:
File Name:3324_4.doc Last Saved On:3/15/99 1:11 PM
To configure Class of Service, do the following:
1.
Select Class of Service Configuration Menu from the Switch
Configuration Menu.
2.
Press a to turn the global switch Class of Service operation on or off by
toggling the Class of Service Enable option.
3.
Select Priority Threshold and type a number between 0 and 7.
4.
Select Configure Port Priority.
The Port Priority Menu displays. From this menu, individual port priority levels
can be configured.
Configuring Port Operation
You can configure RJ-45 ports for operational parameters such as auto-
negotiation, duplex mode, port speed, and flow control. 1000Mb/s port speed
and duplex mode are 1000Mb/s and full duplex respectively, and are thus not
configurable.
To configure port operation, do the following:
1.
Select Port Menu from the Main Menu.
2.
Select Configure and enter a port number. Press <Enter>.
The port number entered displays on the top of the Port Configuration screen.
3.
Select Port Name and enter a Port Name. Press <Enter>.
4.
Select Port Enable to toggle between enabling (Yes) and disabling (No)
the port.
5.
Select Flow Control Enable to toggle between enabling (Yes) or
disabling (No) flow control on the port.
6.
Select Auto-negotiation Enable to toggle between enabling (Yes) or
disabling (No) auto-negotiation on the port.