Compaq iP-25E Projector User Manual


 
E-16
Connections with Personal Computers
iP-25
To the RGB output
connector of the
personal computer
To the audio output
connector of the
personal computer
To the USB
connector of
the personal
computer
Plug in the connection cable
and fasten with the screws
Connection Precautions
•To protect this projector and the equipment to be connected, switch off the power of each unit before
making connections.
Please read the various equipment instruction manuals for information about the connection of the
equipment and the method of use.
When connection is made with a notebook computer and the image is displayed on the LCD screen
of the notebook computer, a proper display might not be obtained on projection screen. Switching
off the display of the notebook computer will result in a proper display. The method of switching off
the display of the notebook computer will differ depending on the PC manufacturer. Please read the
instruction manual of the notebook computer for details.
Connection might not be possibly depending on the model and settings of the personal computer.
Please contact your dealer of purchase for further information.
CAUTION
Connections with the Personal Computer
Basic Connections
NOTE:
Input Connectors See Page E-10.
Please see the "iP Viewer Software Program Operating Instructions" for the method of use when there is a USB cable
connection.
PC connection cable RGB+USB (Supplied item)
Audio cable with mini plugs (Commercially available)
NOTE:
After connecting the RGB+USB cable, please set the personal computer external output and screen display.
When the settings of the external output have not been made, "No signal being input" will be displayed.
When a condition in which a signal has not been input continues for 15 minutes or longer, the lamp is turned off automatically.