Filter
Top Products
www.powerleap.com • www.friendtech.com
-2-
Installation Guid
e
Installation
Installing the PL-P3/SMP™ is quick and easy: First, remove the original processors from the motherboard’s
processor slots. Next, insert a processor into the PL-P3/SMP™, apply thermal compound to the processor, and
install the heatsink/fan. Finally, install the PL-P3/SMP™ into the motherboard’s processor slot and make power
connections.
Removing the original processors from the CPU slots
The original Slot 1 processors. Be
sure to disconnect the system
power before continuing with your
processor upgrade.
After removing one of the original
processors (for details, refer to your
motherboard manual).
After removing both original
processors. We recommend using a
small brush to remove any dust from
the slots.
Inserting a processor, applying thermal compound, and installing the heatsink/fan
Before installing the processor in the
PL-P3/SMP.
Installing the processor in the
PL-P3/SMP. (1)
Installing the processor in the
PL-P3/SMP. (2)
The PL-P3/SMP with installed
processor.
Applying thermal compound to the
processor.
The processor after applying thermal
compound.