Compaq LTE 5200 Personal Computer User Manual


 
The computer logo identifies the model of the computer. A logo for each
model is included with the display assembly spare parts kit. The logo has
an adhesive backing for installation. Select the appropriate logo for your
computer model, remove the protective covering from the adhesive back, and
install the logo as shown in Figure 5-15. The logo should be right reading
when viewed from the back of the computer with the display open.
5.4.2 Computer Feet
The computer feet are rectangular, adhesive-backed rubber pads. Install
the feet by removing the protective covering from the adhesive back and
placing the feet in their positions on the bottom of the computer as shown
in Figure 5-16.