Compaq LTE 5200 Personal Computer User Manual


 
Reverse the above procedure to install the IrDA board.
Chapter 6.15 Speaker Assemblies
The bottom cover assembly must be removed before removing the speaker
assembly. The speaker assembly is installed as a unit with its cable
permanently attached.
To remove the speaker assembly, complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 6.3.
2. Remove the bottom cover assembly as described in Section 6.5.
3. Note the cable routing [2] and disconnect the speaker cable [1] from
the main board (Figure 6-28).