Compaq LTE 5250 Personal Computer User Manual


 
Reverse the above procedure to install a power board.
Chapter 5.14 System Board
To remove the system board, complete the following steps:
1. Remove the CPU panel as described in Section 5.5.1.
2. Remove the display as described in Section 5.8.1.
3. Remove the processor board as described in Section 5.11.
4. Remove the power board as described in Section 5.13.
5. Remove the insulator laying on top of the system board if it is damaged
(Figure 5-56). It is not necessary to remove the insulator to remove
the system board but it is an opportune time to inspect and replace the
insulator.