Filter
Top Products
o Clutch cradles
All of these procedures require removal of the CPU cover and the display
assembly.
5.8.1 Removing and Installing the Display Assembly
To remove and install the display assembly, complete the following steps:
1. Prepare the computer for disassembly as described in Section 5.3.
2. Remove the CPU cover as described in Section 5.5.1.
3. Disconnect the display cables: one connector [4] and grounding lug [5]
on the right, two connectors [2] [3] and one grounding lug [1] on the
left (Figure 5-29).
4. Remove the two screws [1] securing the display assembly to the base
assembly (Figure 5-30), and separate the display assembly from the base
assembly [2].