Filter
Top Products
m
ar345 Program Manual 3 7
_
____________________________________________________________________________________
_
Tabel continued from previous page.
_______________________________________________________________________
No. Description
_______________________________________________________________________
1050 Message: "SHUTTER did not work properly. Abandoning data collection"
Reason: X−ray beam shutter damaged or dirty.
Action: Check shutter. Open and close it manually. Is it very hard
to operate?
1060 Message: "X−ray reading too low ..."
Reason: The X−ray intensity as read from the ion. chamber is
below the critical level (see configuration file:
INTENSITY MIN xxx). The data collection starts only
if the X−ray reading is above the configured value.
Action: Check generator, monochromator or collimator.
1061 Message: "X−rays reading too high for DOSE mode ..."
Reason: The X−ray intensity as read from the ion. chamber shows
very large numbers (>100). The work in DOSE mode becomes
inaccurate.
Action: Turn down gain selector of ion. chambers.
1070 Message: "Could not recover from previous errors after X retries"
Reason: Follow up of previous messages.
Action: Check previous messages.
1080 Message: "SHUTTER did not open during exposure" or
"Shutter did not close at end of exposure"
Reason: X−ray beam shutter damaged or dirty.
Action: Check shutter. Open and close it manually. Is it very hard
to operate?
1090 Message: "Scanner home position (X) differs from Y +/− dy"
Reason: Problem with radial movement of reading head.
Action: Mail mar.spy. Call.
1100 Message: "Cannot open nb_code!"
Reason: File $MARTABLEDIR/mar2300.XXX and/or
$MARTABLEDIR/mar3450.XXX are missing or don’t
have read permission.
Action: Check existence of files and permissions.
_______________________________________________________________________