Compaq MIL-L100S Laptop User Manual


 
11
Operating Specifications
Electrical ratings: AC INPUT 100–127V, 4A or 6A*
200–240V, 2A or 3A*
50/60 Hz
Operating temperature: 5° to 35° C
Storage temperature: –30° to 65° C
Operating humidity: 15 to 80% @ 26° C
Operating altitude: 0–2286 m
Storage altitude: 0–4572 m
* Refer to your PC’s ratings label located on the back of the PC to determine exact electrical rating.
Regulatory and Safety Information
WARNING: Text set off in this manner indicates
that failure to follow directions could result in
damage to equipment, loss of information,
bodily harm, or loss of life.
WARNING: The PC is heavy; be sure to use
ergonomically correct lifting procedures when
moving the computer.
WARNING: Please read the “Additional Safety
Information” located later in this document
before installing and connecting your PC to the
electrical power system.
Batteries are delivered with this product. When empty, do
not throw them away but collect as small chemical waste.
Bij dit product zijn batterijen geleverd. Wanneer deze leeg
zijn, moet u ze niet weggooien maar inleveren als Klein
Chemisch Afval (KCA).
FCC Regulatory and Safety Information
(USA Only)
Federal Communications Commission (FCC) Radio
Frequency Interference Statement
WARNING: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and the receiver.
Connect the equipment into an outlet that is
on a circuit different from the receiver.
Consult the dealer or an experienced radio/TV
technician for help.
The system RFI and Radiated Immunity tests were
conducted with supported peripheral devices and
shielded cables, such as those you receive with
your system. Changes or modifications not
expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
To comply with the limits for an FCC Class B
computing device, always use shielded signal
cables and the power cord supplied with this unit.