Compaq ML350 Server User Manual


 
Index
Index-4 Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Steel Dragon 2.4 Part Number: 278704-002 Last Saved On: 12/18/02 9:51 AM
removable media device blank 1-3
removable media device SCSI cable 1-6
retainer clips 1-3
return kit (rack) 1-6
return kit (tower) 1-6
SCSI Point-to-Point cable 1-6
signal cable kit 1-6
system board 1-5
top panel 1-3
tower-to-rack conversion kit 1-6
parts
catalog, illustrated 1-1
handling 2-2
storing 2-2
transporting 2-2
PCI boards, configuring automatically 3-3
personal injury, warning 2-4
POST
described 3-3
running 3-3
power button
location 4-10
summary 4-8
power cords, disconnecting, warning 2-4
power fluctuations, caution 2-4
Power On/Standby status, LED 4-10
power sources symbol 2-3
power supply
blank, part number 1-3
LEDs 4-11
removing 2-39
replacing 2-39
power supply backplane board
removing 2-40
replacing 2-40
power supply backplane board cover, part
number 1-3
power supply backplane board with cover
part number 1-5
power supply with power factor correction, part
number 1-5
power switch assembly, part number 1-5
power warning 2-3
power, part number 1-5
power-down procedures 2-4
Power-On Self-Test See POST
PPM (Processor Power Module)
part number 1-5
Processor Power Module 1, LEDs 4-11
Processor Power Module 2, LEDs 4-12
removing 2-35
replacing 2-35
socket locations, illustrated 2-31
warning 2-35
processor
caution 2-34
part number 1-5
removing 2-32
replacing 2-34
socket locations, illustrated 2-31
processor 1
LEDs, status 4-11
LEDs, thermal 4-11
processor 2
LEDs, status 4-12
LEDs, thermal 4-12
Processor Power Module See PPM
R
rack server system unit
dimensions 5-3
input voltage requirements 5-3
power supply output 5-3
relative humidity 5-3
temperature range 5-3
wet-bulb temperature 5-3
rack stability, warning 2-5
rackmount hardware kit with rails, part number 1-3
RBSU (ROM-Based Setup Utility)
description 3-3
running 3-3
rear panel components 4-2
removable media device
removing 2-24
replacing 2-25
SCSI cable, part number 1-6
signal cable routing, illustrated 2-13
removable media device blank, part number 1-3
removal and replacement procedures 2-1
resource conflict, resolving 3-3
retainer clips, part number 1-3
return kit (rack), part number 1-6
return kit (tower), part number 1-6
RJ-45 receptacle symbol 2-3
RJ-45 receptacle, warning 2-3
ROM-Based Setup Utility See RBSU
ROMPaq Utility, running 3-2
S
screwdriver symbol 2-3
SCSI LVD hard drive
Point-to-Point cable routing 2-14
Point-to-Point cable, part number 1-6
signal cable kit, part number 1-6