Filter
Top Products
Required Cabling
For required cabling information, refer to the Compaq Web site at
http://www.compaq.com/products/servers/ProLiantML370
NOTE:
This Web site is available in English only.
OS Support
Microsoft Windows NT
®
Server
Microsoft Windows 2000
Microsoft Small Business Server 2000
Novell
®
NetWare
®
Novell NetWare Small Business Suite
SCO
®
OpenServer
®
SCO
®
UnixWare
®
IBM OS/2 Warp Family
LINUX
®
(RedHat
®
, SuSE
®
, Caldera
®
Server)
Sun™ Solaris™ Intel Platform Edition
*
*
NOTE:
Not all storage controllers are supported under Solaris 7 and 8. Please
refer to the Supported Devices list on the Solaris Driver Update download page.
For Solaris 7 please see the following
:
http://www.compaq.com/support/files/server/us/locOsCat/36.html
For Solaris 8 please see the following:
http://www.compaq.com/support/files/server/us/locOsCat/38.html
NOTE:
For a more complete and up-to-date listing of supported OSs and
versions, please visit our OS Support Matrix at:
ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf
NOTE:
For an up-to-date listing of the latest drivers available for the Compaq
ProLiant ML370, please see:
http://www.compaq.com/support/files/server/us/index.html
.
Rack Airflow
Requirements
Rack 9000 and 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The Compaq 9000 Series
Rack and the new 10000 Series Racks provides enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest
processors.
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or
greater in Compaq Rack 7000 series racks with glass doors (165753-001 (42U),
and 163747-001 (22U)), the new processor technology requires the installation
of Compaq’s new High Airflow Rack Door Inserts (327281-B21 (42U), 327281-
B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced airflow for
maximum cooling.
CAUTION:
If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the
equipment:
Front and rear doors:
If your 42U server rack includes closing front
and rear doors, you must allow 5,350 sq cm (830 square inches) of
hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for
ventilation).
Side:
The clearance between the installed rack component and the
side panels of the rack must be a minimum of 7 cm (2.75 inches)
QuickSpecs
Compaq ProLiant ML370 Generation 2
DA - 10901 Worldwide QuickSpecs — Version 40 — 3.11.2003
Page 7