Compaq MP1800 Projector User Manual


 
Getting Started 1-9
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 18 Words: 2604 Saved date: 05/17/004:43 PM File Name: Ch01
Connecting the Projector to a Compaq PC Companion
To connect the projector to a Compaq PC Companion, the PC
Companion must have a male connector adapter and a VGA-out PC
Card with a 15-pin connector.
The VGA-out PC Card with the 15-pin
connector is not included with the Compaq
PC Companion. It is sold separately. For
information on purchasing this card, call
your Compaq authorized dealer or reseller.
To locate a reseller near you, call Compaq
at 1-800-AT-COMPAQ or visit the
Compaq web site at
http://www.compaq.com.
1. Rotate the elevator foot to balance the projector.
2. Connect one end of the signal cable
to the projector and
connect the other end to the VGA-out PC Card. The VGA-out
PC Card may be inserted into the PC slot on the Compaq PC
Companion before or after connecting the signal cable.
Be sure the signal cable aligns with the
connector. Do not force the cable onto the
connector or you may damage the signal
cable or the projector.