Page 22
Copyright March 2003, Computer Dynamics, Inc.
All Rights Reserved
MPAC-18 Manual
Networking
Communications
Your military computer has been configured with networking components that enable you to establish
new networks or connect to existing networks easily. If you intend to use Microsoft NetBEUI, TCP/IP, or
Direct Cable Connection, some minimal setup changes are required before you can use the system for
network applications. In Windows systems, these settings are changed using the Network application in
the Control Panel program group.
Installed Network Components
Network
Component
Comments
PCI Network Adapter Automatically configured in system
TCP/IP Default settings must be changed before connecting to an existing
network. Contact your network administrator for appropriate settings.
NetBEUI Default settings must be changed before connecting to an existing
network. Contact your network administrator for appropriate settings.
System Identification Computer Name: Each system is uniquely identified by its serial number
and can be renamed before adding it to an existing network
Workgroup: The default workgroup is Workgroup. This should be
renamed before adding it to an existing network.
Caution
The IP Address must be changed to a unique address. If it is not changed, conflicts
could occur on your network.
