Compaq MPAC-18 Network Card User Manual


 
Page 6
Copyright March 2003, Computer Dynamics, Inc.
All Rights Reserved
MPAC-18 Manual
INTRODUCTION
The DP027010 is a military computer designed primarily for use as a hardware workstation which runs on
the Windows ® operating system. This military computer is a fully self-contained PC-compatible
computer with a built-in flat screen display and resistive touch screen. The video is provided by a Chips
and Technologies 65555 video processor on the PCI-FPCARD. The DP027010 features include a
Pentium III
TM
CPU to 850 MHz, 10Base2 Ethernet, 512 Mbytes with one double sided non-registered
DIMM, and Universal Serial Bus (USB) ports. The unit is housed in a rugged metal case. The DP027010
military computers are manufactured with an auto ranging main power input unit, which allows operation
from 90 to 138 VAC. The unit is supplied completely assembled and requires only mounting and
connecting.
Before powering up your system for the first time, you should refer to
the procedures in the first section of this manual, which contain
information you will need to set up the operating system and network
communications.
Interchangeable terms
Com 1 Com A
Com 2 Com B
Com 3 Com C
Com 4 Com D
LPT-1 Printer port or Parallel
I/O features
The DP027010 includes the following jacks: Com 2&3, 10Base2 pairs RX1&TX1, RX2&TX2, LPT-1,
USB1&2, and the combined keyboard and mouse. The Ethernet I/O is designed to provide a dual
10Base2 interface to a network.