Compaq NW8240 Laptop User Manual


 
5–28 Maintenance and Service Guide
Removal and Replacement Procedures
3. Disconnect the fan cable from the system board 1.
The following screws should be loosened and removed, then
installed, in the 1, 2, 3, 4, 5, 6, 7, 8 sequence stamped on the
thermal plate.
4. Loosen the four PM2.0×10.0 spring-loaded screws 2 that
secure the thermal plate to the notebook.
5. Remove the four T8M2.0×4.0 screws 3 that secure the
thermal plate to the notebook.
6. Remove the thermal plate 4.
Removing the Thermal Plate
Reverse the above procedure to install the thermal plate.