Compaq OSI/FTAM D43 Network Router User Manual


 
Compaq FTAM Responder Support of
ISO FTAM Functions
OSI/FTAM Responder Manual—425199-001
4-6
Create Mappings
fall within the range supported by the Compaq responder for that document type and
string-significance value, as follows:
If the maximum-string-length parameter is not specified or if the specified value does
not fall within the defined range, the responder returns a negative confirm containing
diagnostic message 1001, indicating unsupported parameter values.
Note that the Compaq responder does not keep a permanent record of the contents-type
parameter values used on creation of a file in the VFS. These values are directly
available only during the life of the FTAM association in which the file was created.
When a remote initiator makes a create request followed by an open request and the
open request specifies a contents type of unknown, the responder uses the contents-type
parameter values specified in the create request. However, this information is lost when
the association is terminated. On subsequent accesses to the file via a select request
followed by an open request with a contents type of unknown, the responder uses its
default values based on the Guardian file structure, as described in the next subsection,
“Select-Open Mappings.”
Although Compaq FTAM supports the NBS-9 document type, it does not appear in
Table 4-6 because Compaq FTAM cannot create NBS-9 files. The “NBS-9 Documents”
subsection, later in this section, describes NBS-9 files in more detail. The Compaq
responder also supports the NonStop Structured Query Language (NonStop SQL) table
files for reading and writing. Compaq FTAM provides no support for creating SQL
files.
Document
Type
String-Significance
Value Maximum-String-Length Value
FTAM-1 not significant 1 <= maximum-string-length <= 7148
FTAM-1 fixed 1 <= maximum-string-length <= 7148
FTAM-1 variable 1 <= maximum-string-length <= 7148
FTAM-2 not significant 1 <= maximum-string-length <= 4072
FTAM-3 not significant 1 <= maximum-string-length <= 4096
FTAM-3 fixed 1 <= maximum-string-length <= 4072
FTAM-3 variable 1<= maximum-string-length <= 4072