Filter
Top Products
Compaq FTAM Responder Diagnostic Messages
OSI/FTAM Responder Manual—425199-001
A-8
Association-Related Diagnostic Messages
2002
Cause. The responder received an initialize request for the unconstrained service class.
The Compaq FTAM implementation does not support the unconstrained service class.
Effect. The association is not established.
Recovery. The application or FTAM user should specify a supported service class on
the initialize request. For a list of service classes that Compaq FTAM supports, see
Section 4.
2003
Cause. Requested functional units were inconsistent with the service class negotiated.
Effect. The association is not established.
Recovery. The application or FTAM user should specify functional units that are
consistent with the proposed service class on the initialize request.
2013
Cause. The checkpoint-window parameter of the initialize request was set to a value
that the responder does not support. The responder expects a value of 1.
Effect. This is an information-only diagnostic message returned in the initialize
response. The association is established.
Recovery. No action is required.
2014
Cause. The responder does not support the value of the FTAM quality-of-service
parameter on the initialize request. The responder supports only a value of
“no recovery” for this PDU parameter.
Effect. This is an information-only diagnostic message returned in the initialize
response. The association is established.
Recovery. No action is required.
Unsupported service class
Unsupported functional unit
Checkpoint window error (unsupported)
Communications ftam-quality-of-service not supported