Filter
Top Products
QuickSpecs
ProLiant BL20p and p-Class system
DA-11411 Canada — Version 1 — August 26, 2002
3
Standard Features
Compaq ProLiant BL20p Server Blade
Processor
Intel Pentium III FC-PGA processor 1.40GHz
Upgradability
Upgradable to dual processing
Cache Memory
512-KB Level 2 Cache
Chipset
ServerWorks HE- SuperLite Chipset
Note: For more information regarding ServerWorks, please see the following URL:
http://www.serverworks.com/products/overview.html
.
Note: This Web site is available in English only.
Memory
Standard
512MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 X 256 MB)
(1 processor model)
Maximum 4096 MB
Standard
1024MB PC133-MHz Registered ECC SDRAM DIMM Memory (2 x 512 MB)
(2 processor model)
Maximum 4096 MB
Note: Memory must be installed in pairs.
Network Controller
Four NICs total:
Three Compaq NC3163 Fast Ethernet NIC PCI 10/100 with full WOL (Wake On LAN), one with PXE support
One 10/100 iLO NIC dedicated to management
Two NICs are upgradable to 10/100/1000T using the Dual Gigabit Ethernet NC7780 NIC option kit
Manageability
Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)
Internal Storage
Hard Drives None ship standard
Maximum Internal Storage 145.6 GB (internal drive cage) (2 x 72.8 GB Wide Ultra3, 1″ drives)
Expansion Slots
No PCI slots all features are integrated
Compaq ProLiant BL p-Class Server Blade Enclosure and Interconnects
6U (10.5-inch), 19-inch wide
ProLiant BL p-Class Server
Blade Enclosure
Holds up to 8 ProLiant BL20p servers blades
10 bays per server blade enclosure
8 bays for server blades
2 outside bays for interconnect modules (RJ-45 patch panels or GbE interconnect switches)
Server blades blind mate into the server blade enclosure backplane for power and data connections
Up to 6 BL p-Class 6U server blade enclosures fit in a 42U rack
Server blade management module attached to the back of each BL p-Class 6U server blade enclosure to report
events all servers and provide asset and inventory information
ProLiant BL p-Class Power
Requirements
Redundant 200V − 240V AC, 30 amp single-phase
Redundant 208V 30amp 3-phase 4 wire,
Redundant -48VDC ± 10%