Filter
Top Products
Page 17
S
S
t
t
e
e
p
p
3
3
:
:
Next, connect the RJ45 Ethernet cable attached to PoE to your PC’s Ethernet
network adapter.
Once you have finished configuring your access point, you can connect the PoE
RJ45 Ethernet cable to your network device, such as to a switch or hub.
S
S
t
t
e
e
p
p
4
4
:
:
Connect the power adapter supplied with PoE to the main electrical supply and the
power plug into the socket of PoE.
Note:
The voltage and current supplied to the access point’s power adapter and PoE
power adapter are different. Do not interchange the power adapters.
S
S
t
t
e
e
p
p
5
5
:
:
Now, turn on your power supply. Notice that the LEDs have lighted up. This indicates
that the access point is receiving power through PoE and that connection between
the access point and your PC has been established.