Filter
Top Products
DSLAAU Manual
30
30
Microsoft Windows 98 and Windows 98 SE
TCP/IP settings are set up automatically during the software
installation process. The following procedure may be used to change
TCP/IP settings, if necessary.
1. From your PC desktop, open the “Control Panel” window (Start =>
Settings => Control Panel). Double click the <Dial-Up Networking>
icon.
2. From the “Dial-Up Networking” window, right click on the <Dial-Up
PPP Connection> icon and click <Properties>.
3. From the “Server Types” tab of the “ Dial-Up PPP Connection”
window, select TCP/IP by checking the check to the left, and click
<TCP/IP Settings...>.
4. Use the “TCP/IP Settings” window to modify the IP address, Name
Server addresses and/or default gateway as follows: