Filter
Top Products
DSLAAU Manual
48
48
• Make sure that Ethernet is selected in the Connect via: drop-down
list.
• The Configure: drop-down list should show Using DHCP Server.
3. Close the “TCP/IP” window. You will be prompted to save the
current configuration. Click <Save>.
MAC OS X
If you have not done so yet, connect corega DSLAAU to the computer
using the proper USB device cable. Connect the DSL line to corega
DSLAAU, too.
TCP/IP settings are set up automatically during the software installa-
tion process. The following procedure may be used to change TCP/IP
settings, if necessary.
1. Open System Preferences and select Network.