Crestron electronic CP-X8150 Projector User Manual


 
26
The Alert Items are shown below.
Item Description
Alarm Time
Congures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts.
Send Mail
Click the [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure.)
Mail Subject
Congures the subject line of the e-mail to be sent.
The length of the subject line can be up to 100 alphanumeric
characters.
(Except Cold Start and Authentication Failure.)
Mail Text
Congures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters, but if you are using some of special characters
below the length may be shorter.
Special characters " ' : & , % \
and space
(Except Cold Start and Authentication Failure.)
Click the [Apply] button to save the settings.
The trigger of Filter Error e-mail is depending on the FILTER
MESSAGE setting in the SERVICE item of the OPTION menu which denes
the period until the lter message is displayed on the projector screen. An
e-mail will be sent when the usage time of the lter exceeds the time limit that is
set. No notication e-mail will be sent if the FILTER MESSAGE is set to TURN
OFF. (
&OPTION menu in the Operating Guide)
Lamp Time Alarm is dened as a threshold for e-mail notication (reminder)
of the lamp time. When the lamp hour exceeds the limit that is congured in the
Projector Web Control, an e-mail will be sent.
Filter Time Alarm is dened as a threshold for e-mail notication (reminder)
of the lter time. When the lter hour exceeds the limit that is congured in the
Projector Web Control, an e-mail will be sent.
Filter Status Notication can be enabled for both or either one of Status
1 and 2. These notications are equivalent to the changing of the FILTER
indicator on the projector. (Status 1: off to orange, Status 2: orange to red)
Refer to the Operating Guide for details of the FILTER indicator.
NOTE
3.1 Projector Web Control - Alert Settings (continued)
3. Web Control