Filter
Top Products
ISYS
®
TILT TOUCHPANELS
Isys
®
Tilt Touchpanel Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
tilt touchpanels
INTERFACE MODULES AND CABLES
TPS-4500IMW Isys
®
Interface Module Wall Plate without Audio
The TPS-4500IMW is a wall plate version of the
TPS-4500IMPC interface module, providing a flush
wall plate connection for any Isys TPS-3000 or
TPS-4000 tilt touchpanel whenever the touchpanel’s
built-in microphone and speakers are not being used.
The TPS-4500IMW mounts into a single-gang
electrical box (2.5" minimum depth) and includes one
front panel RJ45 connection for the 10-pin cable that
connects to the touchpanel (provided with the
touchpanel or sold separately). Several interface
module wall plates may be installed to facilitate
touchpanel connectivity at multiple locations.
SPECIFICATIONS
Connectors – Front Panel
NET/VIDEO: (1) 10-pin RJ45 female, shielded
Connects to touchpanel via “siamese” cable (included
with touchpanel);
Contains Cresnet data, 24 Volts DC power, ground, and
video signals
Connectors – Rear Panel
NET: (1) 4-pin 5mm detachable terminal block
Connects to Cresnet control network
COMP/Y: (1) 4-pin 3.5mm detachable terminal block
comprising (1) composite or ‘Y’ of (1) S-Video input, balanced
or unbalanced;
Input Impedance: 100 ohms balanced, 75 ohms unbalanced
C: (1) 4-pin 3.5mm detachable terminal block
‘C’ of (1) S-Video input, balanced or unbalanced
Input Impedance: 100 ohms balanced, 75 ohms unbalanced
Power Requirements
Cresnet Power Usage: <1 Watt @ 24 Volts DC – not
including touchpanel
Environmental
Temperature: 41° to 113°F (5° to 45°C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
1-gang mountable in a standard electrical box; includes black
metal front panel Decora® insert; requires Decora faceplate
(provided by others)
Dimensions
Height: 4.27 in (10.85 cm)
Width: 2.51 in (6.36 cm)
Depth: 1.49 in (3.77 cm)
Weight
0.32 lb (0.14 kg)
54