Filter
Top Products
Usage
The power on state of GFC 1716A:
When you power on GFC 1716A it will prompt for a password, the default password value is
eight zeros – “ 00000000 “. Please key in eight zeros and enter the same value in retype field.
Note: You may want to consider keeping the default password (00000000) until you are
completly familiar with the unit.
Please write down your password and keep it in a safe place.
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
7-Segment LED Indication:
When you select one of sixteen PC ports and this PC is powered on, the selected port's LED lights.
When you select one of sixteen PC ports and its corresponding PC is shut down or disconnected,
the selected port's LED will flash.
Reset Button (
(Bank Select) and (Port Select) ):
Pressing both “select” button and “bank” button on the master bank simultaneously will
reset GFC 1716A. This reset will return GFC 1716A to its default condition. Check the
password and all of slave banks connected to the GFC 1716A.
If you add a new GFC 1716A as a slave bank, please use reset button of master GFC 1716A to
automatically assign a new ID to it. You can view this new slave bank through the OSD menu.
The PC ports of GFC 1716A are not reset by the Reset command.
Keyboard Hot Key Commands:
You can also command the GFC 1716A by switching ports through a hot key
sequence. To send commands to the GFC 1716A the “SCROLL LOCK” key must be pressed
twice within 2 seconds. When you hear a confirmation beep, the keyboard is in hot key
mode. If you have not pressed any key in hot key mode within 2 seconds the keyboard will
revert to Operation System control state.
Below are the different hot key commands:
within 2 seconds
+ + = Previous Channel
Scroll
Lock
Scroll
Lock
Ĺ
CyberResearch
®
PC Accessories GFC 1716A
CyberResearch, Inc. 23
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com