Filter
Top Products
CPEX Series CyberResearch
®
CPU Cards
28 ©Copyright 2005 CyberResearch, Inc.
Allow you to enable or disable the floppy disk controller.
Configuration options: [Disabled] [Enabled]
Floppy Drive Swap [Disabled]
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allow you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]
Serial Port2 Address [2F8/IRQ3]
Allow you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allow you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [Normal]
Allow you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP]
Parallel Port IRQ [IRQ7]
Configuration options: [IRQ5] [IRQ7]
3.7.5 Hardware Health Configuration
This screen shows you the CPU, System and Power temperature, Fan speed and
CPU core voltage. It also allows your to configure the Hardware Health Monitoring.
H/W Health Function [Enabled]
To enable/disable H/W Health function
FAN1 Mode Setting [Full On Mode]
To configure Fan mode as Full On, Automatic or PWM Manually mode.
3.7.6 ACPI Configuration
This menu is used to change the settings for the Advanced Power Management
(APM). Select an item then press Enter to display the configuration options.