Filter
Top Products
CY7C1381DV25, CY7C1381FV25
CY7C1383DV25, CY7C1383FV25
Document #: 38-05547 Rev. *E Page 15 of 28
Identification Codes
Instruction Code Description
EXTEST 000 Captures IO ring contents. Places the boundary scan register between TDI and TDO.
Forces all SRAM outputs to High-Z state.
IDCODE 001 Loads the ID register with the vendor ID code and places the register between TDI and
TDO. This operation does not affect SRAM operations.
SAMPLE Z 010 Captures IO ring contents. Places the boundary scan register between TDI and TDO.
Forces all SRAM output drivers to a High-Z state.
RESERVED 011 Do Not Use. This instruction is reserved for future use.
SAMPLE/PRELOAD 100 Captures IO ring contents. Places the boundary scan register between TDI and TDO.
Does not affect SRAM operation.
RESERVED 101 Do Not Use. This instruction is reserved for future use.
RESERVED 110 Do Not Use. This instruction is reserved for future use.
BYPASS 111 Places the bypass register between TDI and TDO. This operation does not affect SRAM
operations.
119-Ball BGA Boundary Scan Order
[13, 14]
Bit # Ball ID Bit # Ball ID Bit # Ball ID Bit # Ball ID
1
H4
23 F6 45 G4 67 L1
2T424E746A468M2
3T5 25 D7 47 G3 69 N1
4T626H748C370P1
5R5 27 G6 49 B2 71 K1
6L528E650B372L2
7R6 29 D6 51 A3 73
N2
8U630C752C274P2
9R731B753A275R3
10 T7 32 C6 54 B1 76 T1
11 P6 33 A6 55 C1 77 R1
12 N7 34 C5 56 D2 78 T2
13 M6 35 B5 57 E1 79 L3
14 L7 36 G5 58 F2 80 R2
15 K6 37 B6 59 G1 81 T3
16 P7 38 D4 60 H2 82 L4
17 N6 39 B4 61 D1 83 N4
18 L6 40 F4 62 E2 84 P4
19 K7 41 M4 63 G2 85 Internal
20 J5 42 A5 64 H1
21 H6 43 K4 65 J3
22 G7 44 E4 66 2K
Notes
13.Balls that are NC (No Connect) are preset LOW.
14.Bit #85 is preset HIGH.
[+] Feedback