Filter
Top Products
CY7C1440AV33
CY7C1442AV33
CY7C1446AV33
Document #: 38-05383 Rev. *E Page 15 of 31
TAP DC Electrical Characteristics And Operating Conditions
(0°C < TA < +70°C; V
DD
= 3.135 to 3.6V unless otherwise noted)
[12]
Parameter Description Test Conditions Min. Max. Unit
V
OH1
Output HIGH Voltage I
OH
= –4.0 mA, V
DDQ
= 3.3V 2.4 V
I
OH
= –1.0 mA, V
DDQ
= 2.5V 2.0 V
V
OH2
Output HIGH Voltage I
OH
= –100 µA V
DDQ
= 3.3V 2.9 V
V
DDQ
= 2.5V 2.1 V
V
OL1
Output LOW Voltage I
OL
= 8.0 mA V
DDQ
= 3.3V 0.4 V
I
OL
= 1.0 mA V
DDQ
= 2.5V 0.4 V
V
OL2
Output LOW Voltage I
OL
= 100 µA V
DDQ
= 3.3V 0.2 V
V
DDQ
= 2.5V 0.2 V
V
IH
Input HIGH Voltage V
DDQ
= 3.3V 2.0 V
DD
+ 0.3 V
V
DDQ
= 2.5V 1.7 V
DD
+ 0.3 V
V
IL
Input LOW Voltage V
DDQ
= 3.3V –0.3 0.8 V
V
DDQ
= 2.5V –0.3 0.7 V
I
X
Input Load Current GND < V
IN
< V
DDQ
–5 5 µA
Identification Register Definitions
Instruction Field
CY7C1440AV33
(1M x 36)
CY7C1442AV33
(2M x 18)
CY7C1446AV33
(512K x 72) Description
Revision Number (31:29) 000 000 000 Describes the version number.
Device Depth (28:24)
[13]
01011 01011 01011 Reserved for Internal Use
Architecture/Memory Type(23:18) 000000 000000 000000 Defines memory type and
architecture
Bus Width/Density(17:12) 100111 010111 110111 Defines width and density
Cypress JEDEC ID Code (11:1) 00000110100 00000110100 00000110100 Allows unique identification of
SRAM vendor.
ID Register Presence Indicator (0) 1 1 1 Indicates the presence of an ID
register.
Scan Register Sizes
Register Name Bit Size (x36) Bit Size (x18) Bit Size (x72)
Instruction 3 3 3
Bypass 1 1 1
ID 32 32 32
Boundary Scan Order (165-ball FBGA package) 89 89 –
Boundary Scan Order (209-ball FBGA package) – – 138
Identification Codes
Instruction Code Description
EXTEST 000 Captures the I/O ring contents.
IDCODE 001 Loads the ID register with the vendor ID code and places the register between TDI and
TDO. This operation does not affect SRAM operations.
SAMPLE Z 010 Captures I/O ring contents. Places the boundary scan register between TDI and TDO.
Forces all SRAM output drivers to a High-Z state.
RESERVED 011 Do Not Use: This instruction is reserved for future use.
Notes:
12.All voltages referenced to V
SS
(GND).
13.Bit #24 is “1” in the ID Register Definitions for both 2.5V and 3.3V versions of this device.
[+] Feedback